Wear-Resistant FIBC Bulk Bags for Metal Scrap Loading are specially designed for the collection, lifting, storage and transportation of iron, aluminum, copper and other machining swarf.
Manufactured from UV-stabilized, heavy wear-resistant PP woven fabric, the bag provides enhanced resistance against cuts and punctures caused by sharp metal chips. The U-panel construction, four reinforced lifting loops and 1500kg Safe Working Load provide reliable performance for demanding metal scrap handling operations.
Top filling and bottom discharge spouts support controlled loading and unloading, while optional PE liners help contain cutting oil and other liquid residues. Custom dimensions, liners, coatings and printing are available.
Sharp metal chips and machining swarf can easily puncture or damage conventional bulk bags during filling, lifting and transportation.
Heavy wear-resistant PP woven fabric provides enhanced resistance against cuts, abrasion and punctures from iron, aluminum and copper swarf, helping reduce bag damage and material spillage.
Metal scrap can have a high bulk density and place significant stress on the bag during lifting.
The U-panel construction combined with four reinforced lifting loops and heavy-duty stitching provides balanced load distribution and a standard Safe Working Load of 1500kg for secure handling.
Metal recycling and machining facilities may require temporary outdoor storage of collected scrap.
UV-stabilized fabric provides enhanced resistance against sunlight-induced aging, making the bag suitable for outdoor yard storage and transportation applications.
The standard configuration features a top filling spout and bottom discharge spout.
Both openings can be secured during operation, helping reduce the escape of fine metal chips while providing efficient loading and controlled unloading.
Machining swarf may carry residual cutting oil or other liquids that can seep through conventional woven fabric.
An optional PE leak-proof liner provides an additional containment layer, helping reduce oil leakage and ground contamination during storage and transportation.
Custom logos, batch codes, material identification, handling instructions and cut-hazard warnings can be printed on the bags.
Clear markings support scrap classification, inventory management and safer handling in machining and recycling facilities.
| Specification | Details |
|---|---|
| Product Name | Wear-Resistant FIBC for Metal Scrap Loading |
| Material | UV-Stabilized Heavy Wear-Resistant PP Woven Fabric |
| Bag Construction | U-Panel |
| Safe Working Load (SWL) | 1500 kg |
| Safety Factor | 5:1 Standard |
| Dimensions | Customizable |
| Fabric Weight | 220–260 g/m² |
| Coating | Optional PP Coating |
| Lifting Loops | 4 Loops |
| Top Type | Top Filling Spout |
| Bottom Type | Bottom Discharge Spout |
| Liner | Optional PE Leak-Proof Liner |
| UV Stabilization | Yes |
| Applications | Iron, Aluminum & Copper Machining Swarf |
| Printing | Custom Logo, Warning Text & Project Marking |
| Packing | Compressed Bale on Pallet |
Suitable for iron chips, steel turnings and other machining waste generated during cutting, milling, drilling and turning operations.
Heavy wear-resistant woven fabric helps withstand abrasion and punctures from sharp metal edges during collection and transportation.
Suitable for aluminum chips, shavings and machining swarf.
The U-panel structure and four reinforced lifting loops provide reliable handling performance, while the filling and discharge spouts help control loose metal debris.
Suitable for copper chips, turnings and other metal processing residues.
The reinforced construction provides reliable bulk handling, while custom markings can be used for easier material identification and recycling classification.
Suitable for machining scrap containing residual cutting oil.
An optional PE leak-proof liner helps contain oil and liquid residues, reducing leakage during temporary storage and transportation.
Designed for the collection, classification, storage and transportation of machining scrap at recycling facilities and metal processing plants.
UV-stabilized fabric makes the bag suitable for applications involving outdoor yard storage.
Heavy wear-resistant PP woven fabric provides enhanced protection against abrasion, cuts and punctures caused by machining swarf.
The heavy-duty construction provides a standard Safe Working Load of 1500kg for dense metal scrap handling.
The U-panel bag body combined with four reinforced lifting loops provides balanced force distribution during lifting.
UV stabilization provides additional protection against fabric aging during outdoor storage and transportation.
PE leak-proof liners are available for oily metal chips and machining scrap containing cutting-fluid residues.
Top filling and bottom discharge spouts support controlled material handling and help minimize the escape of loose metal chips.
Bag dimensions, SWL, fabric specifications, coatings, liners, lifting configurations, top and bottom structures and printing can be customized according to your metal scrap handling requirements.
Different metal scraps have different bulk densities, shapes, sharpness levels and oil-containment requirements.
Tell us your scrap type, bulk density, required SWL, bag dimensions, liner requirements and working environment, and we will recommend a suitable Wear-Resistant FIBC configuration for your metal scrap collection and transportation requirements.
Request a Quote for Your Custom Metal Scrap FIBC Bulk Bags Today.
Please provide your scrap type, bulk density, required Safe Working Load, bag dimensions, liner requirements and working environment.
Based on this information, we can recommend a suitable wear-resistant FIBC configuration for your metal scrap handling application.
Yes. Bag dimensions and Safe Working Load can be adjusted according to your requirements. Wear-resistant fabric specifications and sewing strength can also be selected according to the characteristics and weight of your metal scrap.
The standard configuration for this model uses a top filling spout and bottom discharge spout.
Other top and bottom structures can be customized according to your loading, storage and discharge requirements.
Yes. An optional PE liner can be used to help contain cutting oil and reduce leakage from oily metal swarf.
Aluminum foil liners are also available for applications requiring special moisture protection.
The standard model is designed specifically for metal machining scrap and is not food-grade.
Hazardous or static-sensitive applications require a specially modified FIBC designed according to the intended material and operating conditions.
Yes. Custom logos, handling instructions, material information, batch codes and cut-hazard warning text can be printed.
Printing colors and positions can be customized according to order requirements and MOQ.
Lead time and minimum order quantity depend on bag dimensions, liner type, printing requirements and UV wear-resistant fabric specifications.
Please send us your detailed RFQ for an accurate quotation and production schedule.
Specification sheets, load test reports and related quality documents can be provided according to your project requirements.
admin
admin
admin
